|Material:||Stainless Steel 304||Application:||Automotive Industry Ultrasonic Cleaner|
|Option:||Bell Crank Washer Degreases||Industry:||Automotive Industry|
car parts cleaning machine,
auto parts cleaning tanks
Automotive Parts Cleaner System Auto Parts Cleaning Tanks Degreases And Dries Bell Cranks
Automotive Industry Ultrasonic Cleaner Bell Crank Washer Degreases And Dries Bell Cranks
Auto Parts Cleaning machine
We are manufacturing and supplying of Automotive Ultrasonic Cleaners. We offer a wide range of ultrasonic cleaners. These are Single or Multistage Ultrasonic Cleaners, which are both manually operated & fully automated systems. Further, the machine is widely used and appreciated by our clients due to its professional dependability and user friendliness.
Ultrasonic Cleaning system Design:
Considerations in the design of any cleaning system include the contaminants on the part(s), the required cleanliness level, the geometry and material of the part(s), the quantity to be processed, and the previous system design and layout (if applicable). The part geometry, production rate, and cleaning time required will determine the size of the cleaning system, once the overall process has been decided
Cleanliness considerations :
In a typical aqueous ultrasonic cleaning system, it is the cleaning stage(s) that will remove or loosen the contaminants. The following rinse stage(s) remove any remaining loosened soils and residual detergent, and a dryer removes any remaining rinse water. The overall process of the system is usually determined experimentally. We have an applications lab where, through a process of experience, trial, and error, a properly designed cleaning process can be determined to meet the cleanliness levels specified. There are a variety of ways to check for cleanliness. Some are as simple as a water break test on the part to see if most oil has been removed. Others are as elaborate as surface quality monitoring that uses optically stimulated electron emission technology to measure thin films of contaminants down to the Angstrom level.
Ultrasonic Cleaner Auto Industry
We are the manufacturers of custom built Ultrasonic Cleaning machines for degreasing and cleaning of auto parts for OEMs , work shops , job works and auto-restoration industry. We expertise in providing customized designed solution for auto parts cleaning.
Ultrasonic cleaning is a water based cleaning solution where ultrasonic transducers are used to provide cavitation agigation insude the tank which has waer and suitable chemical to clean oil,dirt,debree,grease and other contaminants from various types of auto components.
We expertise in all types of ancilary parts washing like brakepads, steering coloumns, crank shats, pistons, valves, gaskets, clutch pads, mirrors and many more.
Features of the machine:
• Low maintainence machine
• Heavy duty cleaning systems
• Chemical friendly- SS Rust proof body
• Industrial guage farication, build to last
• One year warrenty on any manufacturing defect
• Completely customized to suit the cleaning requirement
• Less human interfearance and less scope of error
• Accurate and uniform cleaning everytime
Automotive Ultrasonic Cleaners
Small Ultrasonic Cleaner is usually meant for maintainence purpose rather than production purpose. It is also largely used by 3 tier OEMs for auto parts cleaning, by restoration companies, r&d labs in auto components and many other places
Automotive Ultrasonic Cleaners is primarily an aqueous tank systemthat uses ultrasonic energy to remove dirt, grease, oiland baked-on carbon from parts. Contaminants such aspaint, rust, glued-on gaskets, and heavy layers of bake don carbon can also be removed by ultrasonic cleaning but require more aggressive chemistries. Unlike someother cleaning processes, ultrasonic cleaning will notdamage intricate, lightweight, or easily damaged parts.
Ultrasonic cleaning equipment for use in Marine Drilling Oil And Gas Industries
AGSONIC ultrasonic cleaning technology is highly effective, removing contaminants from surface areas inaccessible to spray washing or manual cleaning.
Ultrasonic cleaning technology reaches the most inaccessible surface areas of complex aerospace components used in manufacturing, overhaul, servicing and maintenance stages. Ultrawave’s ultrasonic equipment provides a much faster and higher quality cleaning results than spray washing and manual scrubbing. It is a more environmentally friendly alternative to solvent cleaning.
All ultrasonic baths are supplied complete with lid and basket
Welcome to Radiators Engines Pistons And Cylinders cleaning - Radiators Engines Pistons And Cylinders Cleaning, Truck Engine Parts Cleaning, Motor Bike Engine Parts Cleaning.
Our Ultrasonic cleaning process, can effectively clean the following components- Aerospace And Aircraft Parts ,Aluminum castings, engine blocks, Carburetors, Cylinder Heads, Engines, Engine Components, Gear Boxes, Filters, Tubes and Valves.
AG Aerospace And Aircraft Parts ultrasonic cleaning machine are revolutionizing cleaning methods and processes on the Aerospace , our Aerospace And Aircraft Parts ultrasonic cleaning machine can clean all kinds of automotive, aircraft, and marine engine parts, ultrasonic technology for cleaning parts eliminates manual labor while providing you with superior cleaning action, most parts can be cleaned with environmentally friendly water-based solutions
Ultrasonic cleaning machines work on the principle of agitating cleaning solvents using high frequency sound waves, the ultrasonic agitation creates millions of microscopic bubbles that implode releasing vast quantities of energy, this action, know as cavitations, dislodges any contaminant stuck to the surface of a part, ultrasonic cavitations thoroughly cleans every surface in contact with the cleaning fluid
ultrasonic tank models for your choice:
|Model||Tank size||Unit size||Volume||Ultrasonic power||Frequency||Heating power||Timer||Heating temperature|
How the System Operates:
The system operates in the following manner:
The cover is opened and the batch of parts is placed onto the basket rest. Dripping liquids are directed back to the ultrasonic cleaning tank
Contact Person: AGSONIC