Dual Frequency Automotive Parts Cleaning Equipment , Ultrasonic Parts Cleaner

Dual Frequency Ultrasonic Cleaner Engineering Parts Engine Auto Parts Ultrasonic Cleaner Immersion

A higher frequency produces smaller cavitation bubbles.

These cover fine featured complex surfaces more thoroughly and are gentler than low frequencies.

For fine cleaning of very delicate jewelry, electronics, and soft metals with polished surfaces consider a unit operating at 80 – 130 kHz.

If you are cleaning capillary tubes or spectrophotometer cuvettes you will need a unit that operates at 80 kHz or higher.If you are cleaning a variety of materials consider a dual frequency ultrasonic cleaner.

Dual Frequency Ultrasonic Cleaner Engineering Parts Engine Auto Parts Ultrasonic Cleaner Immersion

28 kHz: The Heavy Weight Boxer

A 25 kHz generator is used with larger mass items, such has a large cast iron block used for injection molding, a massive steel cutting tool or large stainless steel plates. It works best when the contaminant is on the surface of the item and requires a little more punch to remove it. This frequency also works well for removing baked on materials and is often found on plating lines for pre-treatment prior to the plating process. Larger tanks often are retrofitted with 25 kHz systems for these types of jobs.

40 kHz: The Workhorse

The vast majority of ultrasonic cleaning applications require the mid-sized cavitation bubbles created by a 40 kHz generator. Approximately 90 percent of all ultrasonic cleaning applications can be addressed at this frequency. It has enough power to shake contaminants loose but is small enough to penetrate closer to the substrate. This frequency works best when items have many through-holes and/or complicated blind holes that are difficult to reach using the larger cavitation bubbles generated at lower frequencies.

Typical applications of 40 kHz generators include carburetor cleaning, removing oils and metal chips from general machine shop applications, soot removal from items damaged in fires, cleaning of ceramics used in the high technology fields, removal of biological contaminants from surgical tools and many more.

How does ultrasonic cleaner technology clean?

Cavitation bubbles are vacuum cavities as tiny as red blood cells, or about 8 thousandths of a millimeter across. They are so small that it would take 1,250 of them lined up in a row to reach 1 cm long.

Under pressure of continuous vibration, these bubbles stretch and compress at a fast rate. Once they reach a certain size, as determined by the frequency and strength of the sound waves produced, the bubbles lose structural integrity and collapse violently. When these implosions happen near a surface, the bubbles emit high-powered streams of plasma that travel at more than 500 miles per hour and collide with, agitate and remove even very tiny particles and substances from that surface.

ULTRASONIC CLEANING

Ultrasonic cleaning uses sound waves to create millions of small bubbles in a tank of cleaning solution. The parts to be cleaned are submerged in the solution and as the bubble are formed and “explode” they remove any dirt, grease, carbon etc. This method also works very well. The one disadvantage that I noticed with ultrasonic cleaning is that aluminum parts do not come out of the cleaning tank looking like new. They seem to have some discoloration to them even though they were clean. If you are going to paint the parts then this shouldn't matter.

What Ultrasonic Cleaner Engineering Parts Cleaning Industrial Washing Machine can do ?
Ultrasonic cleaners remove dirt, oils, lubricants, carbon, rust,and other types of grime that build up on engines and mechanical parts. Grooves, internal passageways, seals, and other hard to reach areas are cleaned easily, eliminating hours of disassembling and reassembling complex parts. Carburetors, pistons, cylinder heads, aluminum parts, and brake calipers are a few examples of components that are cleaned thoroughly with no manual scrubbing in an ultrasonic cleaner

Why choose ultrasonic cleaning machine to clean our engine block and engine parts?

Clean intricate and difficult to reach areas easily

A major challenge of any cleaning system is the difficulty faced in tackling tiny spaces, intricate geometries, and difficult to reach surfaces, ultrasonic cleaning penetrates even blind holes and small apertures, that previously had hit-and miss success rates, the uniform agitation of the cleaning solution ensures that the cleaning action penetrates even hard to reach areas that previously required specialized brushes and other complicated cleaning devices with no real guarantee of a successful and consistent cleaning outcome, various factors go into determining which combination of an ultrasonic unit and chemical solution is suited to your particular requirement

For effective cleaning the ultrasonic cleaning machine must use the right of cleaning chemistry, operate at the right temperature and use the correct frequency, the part to be cleaned the contaminant to be removed and the degree of soil, determine this, our years of experience advising manufacturing and maintenance clients on the right process for their cleaning needs help us identify the exact product combo that you need, just send AG SONIC email or call us, and we’ll guide you to the right solution quickly

Parts Engine Auto Parts Ultrasonic Cleaner models for your choice:

Features:

1. Whole machine made of SUS304 stainless steel, 2mm thickness tank for acid-proof, anti-corrosive.

2. Industrial grade ultrasonic transducer, moisture-proofed PCB.

3. Advanced generator, sweep frequency, high quality, better effect.

4. Ultrasonic power can be adjusted from 0-100%.

5. Temperature can be set from 30-110°C.

6. Industrial grade for 24 hours continuous working.

7. Ultrasonic frequency: 28kHz or 40kHz.

8. Fully portable, 36L and above volume machines are with wheels, locking wheels for stability.

9. With free lid and stainless steel SUS304 basket.

10. Customized according to customer’s request.

Why use AGSONIC’s Ultrasonic Cleaning Systems

• Low maintainence machine

• Heavy duty cleaning systems

• Chemical friendly- SS Rust proof body

• Industrial guage farication, build to last

• One year warrenty on any manufacturing defect

• Completely customized to suit the cleaning requirement

• Less human interfearance and less scope of error

• Accurate and uniform cleaning everytime